|
Here you can see information on our Victorian Cast range of spiral stairs
All treads, reeded balusters, panels are moulded from genuine Cast Iron making them sturdy yet beautiful to look at. Ideal for internal or external use.
The Victorians realized the virtues of casting Iron, still today we can see many fine examples that have stood the test of time. At Elite we manufacture our Cast Iron spiral stairscases to the same high quality ensuring our customers a product to last a lifetime.
To enlarge the thumb-nails click on the image
|
 |
The Victorian range is available in 3 different diameters, 1067mm, 1370mm and 1830mm.
All treads can accommodate 1,2 or 3 balusters and all treads are machined to suit any floor to floor height at no extra cost.
The stair case featured has tradition type balluster as an option |
| |
 |
Here this overhead shot of the staircase shows tradition balusters,there are different wrought iron balusters available,such as the Rhonde.This picture shows the 1070mm dia stair. |
| |
 |
The Victorian cast spiral suits any traditional or modern situation |
| |
 |
The 1830 dia cast staircase shown here has three reeded balusters per tread to comply to the 100mm gap rule to conform to building regs.This stair as shown here has been installed as the main access to the upper floor of this dwelling. |
| |
 |
These reeded balusters,fitted in a balcony situation show the detail of the baluster.As shown below they match in with the charlecote panel as an alternative look. |
| |
 |
This overhead picture shows the filagree pattern on the treads.Elite can manufacture most landing shapes,This 60 degree platform was made to the customers specification.All platforms have a facia plate to match the tread pattern. |
| |
 |
The Charlecote panel is a beautiful addition to any Cast Iron staircase, designed to compliment the reeded baluster to give a more ornate look. |
| |
 |
This overhead picture details the quality of the filigree pattern on the treads. |
| |
 |
This close up shows the attention to detail on our Reeded balusters and Charlecote infill panels. |
| |
 |
Elite can manufacture any size and shape landing platform to suit your needs.
This particular landing was manufactured to suit a circular opening, for use with our 1830mm diameter Cast Iron staircases. |
| |
Cast Iron spiral stairs staircases are available in 3 diameters 1067mm, 1370mm & 1830mm.
All our Cast Iron are tested to BS1470.
Stair 1370mm designed to comply to BS5395 Cat A
Stair 1830mm designed to comply to BS5395 Cat B
All spiral stairs are available in any required height manufactured in equal risers from 190mm to 220mm.
Please contact Elite Spiral Stairs to discuss risers.
All cast spiral staircases are available with 1, 2 or 3 balusters per tread. The charlecote in-fill panel is suitable for all 3 diameter stairs.
All cast stairs are available with any baluster or newel posts including the baluster from the timber range of which Elite Spiral Stairs manufacture.
All Cast Iron spiral stairs are available clockwise or anti-clockwise accending.
All Cast Iron spiral stairs are painted black eggshell as standard. For other colours please contact us.
Landings
Landings are 60 degrees or 90 degrees as standard for square openings or round openings.
If you require and further assistance working the cost of your stairs please contact us. |
)
)
)
)
)
)
)
)
)
)